5 Tips for Furnace Maintenance
Here are some furnace maintenance tips to get you ahead of the heating season game:
Summer has officially come to an end, and the temperatures are steadily dipping. Before you can cozy up at home, your furnace needs a little TLC. We know, you haven’t thought about that ol’ furnace for months! But now’s the time to check up on it for a smooth transition into heating season.
Your furnace needs to be maintained yearly and the best time to do it is before the long heating season. You can enjoy a hiccup-free heating season and avoid expensive furnace replacement or repair with these 5 tips.
Filters keep the dirt and debris from the air from getting to the furnace. They need to be cleaned or changed regularly in order to:
- continue blocking the dirt from passing through
- to provide unrestricted air flow to the furnace
Clean filters mean air flow, which means a smooth-running furnace!
2. Check your fan belts and motors
If your furnace uses a fan belt to drive the fan blower, now’s the time for a tune-up. Look for:
- Adequate belt tension (½” to ¾” is just right)
- Excessive wear and tear (in which case, time to replace the belt)
Don’t forget about the bearings either—they need lubrication. Add about 5 drops of lubricant in each port, on each end of the motor.
3. Check your vents
If your furnace has a sidewall vent, the area around the vent needs to stay clear – leaves and high snow levels are common things that build up during the heating season. A little shovelling, a little raking… easy, right?
These furnaces also need to get rid of the water they produce during the heating cycle. Water produced is discarded through a condensate drain pipe.
To keep the drain pipe working smoothly:
- Make sure the pipe is free of blockage by taking one end of the hose and pouring hot water into it – this will help remove any blockage.
Your home may also have a condensate pump to drain from the furnace (usually if your home doesn’t already have a nearby floor drain).
To check the pump is flowing freely:
- Fill a 1-gallon jug with hot water, and slowly pour the water into the pump inlet.
- Once the water level nearly reaches the top of the reservoir it will automatically turn the pump on and discharge the water through the outlet pipe—which means everything’s working!
- One last thing to check: make sure the pump automatically shuts off when the reservoir has been emptied
4. Clear out your heat pump
It’s important to keep your heat pump’s outdoor condenser clean by washing any debris from the condenser coil.
- Use your outdoor garden hose with a wide spray pattern
- Keep the water spraying downward
- Be careful—don’t spray with a direct stream of water, or else you’ll dent the aluminium fins! Fins that are bent work less efficiently.
As for the outdoor unit, regular removal of debris around the area will keep it in tip-top shape. Protect your investment! Remember to cover your outdoor unit for the wintertime to avoid any snow damage.
5. Test your Thermostat
Now that your furnace is primed and ready to go, it’s time to check your thermostat operation! This is to make sure your thermostat and your heating system are talking to each other and will work together to keep your home warm and cozy.
Don’t get caught with a cold home at the first turn of temperatures! We don’t often think about our heating systems, but to ensure a smooth transition to heating season our furnace maintenance tips are key to getting your home ready for the fall.
Source: Ecobee.com